Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultradur® B 4520 FC R01 - PBT - BASF

Check here, which other Ultradur datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - 材料特有の特性

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Ultradur® B4520 FC R01 UN is suitable for plastic parts, where material approval regarding drinking water contact and direct food contact is a mandatory requirement.

The product is approved according to
· 21 CFR FDA §177.1660 "Poly(tetramethylene terephthalate)";
· European Food Contact European Food Contact Commission Regulation (EU) 10/2011;
· GMP (EC) N°2023/2006
For questions regarding the compliance with further regulations, and certificates, please contact your local BASF representative or Plastics Safety (E-Mail: plastics.safety@basf.com).

The products can also be offered as BMBcert™ and/or Ccycled™. Due to the Massbalance approach the product properties do not change.

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	24	cm³/10min	ISO 1133
温度	250	°C	-
荷重	2.16	kg	-

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	2500	MPa	ISO 527
降伏応力	56	MPa	ISO 527
降伏ひずみ	3.6	%	ISO 527
破壊呼びひずみ	>50	%	ISO 527
シャルピー衝撃強さ, +23°C	260	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30°C	200	kJ/m²	ISO 179/1eU
Type of failure	C	-	-
ノッチ付きシャルピー衝撃強さ, +23°C	3.5	kJ/m²	ISO 179/1eA
Type of failure	C	-	-
ノッチ付きシャルピー衝撃強さ, -30°C	3	kJ/m²	ISO 179/1eA

熱的特性	値	単位	テスト基準
ISO データ
溶融温度, 10°C/min	223	°C	ISO 11357-1/-3
荷重たわみ温度, 0.45 MPa	130	°C	ISO 75-1/-2

その他の特性.	値	単位	テスト基準
密度	1300	kg/m³	ISO 1183

材料特有の特性	値	単位	テスト基準
ISO データ
粘度数	120	cm³/g	ISO 307, 1157, 1628

特殊な特性

Certifications

Food contact, Food approval 10/2011, Food approval FDA 21 CFR

その他の情報

村遜速揃

PREPROCESSING
Pre/Post-processing, max. allowed water content: .04 %
Pre/Post-processing, Pre-drying, Temperature: 80 - 120 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 250 - 275 °C
injection molding, Melt temperature, recommended: 260 °C
injection molding, Mold temperature, range: 40 - 70 °C
injection molding, Mold temperature, recommended: 60 °C

耐薬品性

酸
	5wt％酢酸 (23ﾟC)
	10wt％クエン酸 (23ﾟC)
	10wt％乳酸 (23ﾟC)
塩基
	35wt％水酸化ナトリウム (23ﾟC)
	10wt％水酸化アンモニウム (23ﾟC)
アルコール
	イソプロピルアルコール23℃ (23ﾟC)
	メタノール　23℃ (23ﾟC)
	エタノール　23℃ (23ﾟC)
炭化水素
	ヘキサン (23ﾟC)
	トルエン (23ﾟC)
	イソオクタン (23ﾟC)
ケトン系溶剤
	アセトン (23ﾟC)
エーテル溶剤
	ジエチルエーテル (23ﾟC)
鉱油
	SAE 10W40 マルチグレードモーターオイル (23ﾟC)
	SAE 10W40 マルチグレードモーターオイル (130ﾟC)
標準燃料
	ディーゼル燃料（ISO 1817液F) (23ﾟC)
食塩水
	2wt％炭酸ナトリウム (23ﾟC)
その他
	エチルアセテート (23ﾟC)
	水 (23ﾟC)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.