Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrafuse ASA - ASA - BASF

Material Data Center offers the following functions for Ultrafuse ASA:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrafuse datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 熱的特性 - その他の特性. - 3D Data
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 3.9 cm³/10min ISO 1133
温度 260 °C -
荷重 2.16 kg -
熱的特性値単位テスト基準
ISO データ
ガラス転移点, 10ﾟC/min 112 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 92 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 101 °C ISO 75-1/-2
その他の特性.値単位テスト基準
密度. 1070 kg/m³ ISO 1183
3D Data値単位テスト基準
Other Standards[S]
引張弾性率, flat 1830 MPa ISO 527
引張弾性率, upright 1400 MPa ISO 527
引張強度, flat 34.6 MPa ISO 527
引張強度, upright 12 MPa ISO 527
破壊ひずみ, flat 4.5 % ISO 527
破壊ひずみ, upright 1 % ISO 527
曲げ弾性率, flat 1730 MPa ISO 178
曲げ弾性率, on-edge 1640 MPa ISO 178
曲げ弾性率, upright 1040 MPa ISO 178
曲げ強さ, flat 59.4 MPa ISO 178
曲げ強さ, on-edge 61.2 MPa ISO 178
曲げ強さ, upright 19.9 MPa ISO 178
シャルピー衝撃強さ, +23°C, flat 42.7 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, +23°C, on-edge 41.2 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, +23°C, upright 5.1 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C, flat 8.9 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, +23°C, on-edge 15.5 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, +23°C, upright 2.7 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C, flat 36.8 kJ/m² ISO 180/1U
アイゾット衝撃試験, +23°C, on-edge 39.3 kJ/m² ISO 180/1U
アイゾット衝撃試験, +23°C, upright 6.8 kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C, flat 8.7 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ, +23°C, on-edge 11.4 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ, +23°C, upright 1.9 kJ/m² ISO 180/1A
S: These properties are reported by the producer according standards that are different to our defaults.
特殊な特性
成形加工法.
Additive Manufacturing
納入形状.
Monofilament
特殊な特性.
紫外線安定化., 熱安定化.
耐薬品性
General Chemical Resistance
領域別の利用可能性
北アメリカ., ヨーロッパ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.