Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrafuse PPSU - PPSU - BASF

Material Data Center offers the following functions for Ultrafuse PPSU:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrafuse datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 熱的特性 - その他の特性. - 3D Data
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 39 cm³/10min ISO 1133
温度 360 °C -
荷重 10 kg -
熱的特性値単位テスト基準
ISO データ
ガラス転移点, 10ﾟC/min 220 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 212 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 218 °C ISO 75-1/-2
ビカット軟化温度, B 220 °C ISO 306
線膨張係数, 平行 55 E-6/K ISO 11359-1/-2
その他の特性.値単位テスト基準
密度. 1210 kg/m³ ISO 1183
3D Data値単位テスト基準
Other Standards[S]
引張弾性率, flat 2040 MPa ISO 527
引張弾性率, upright 2040 MPa ISO 527
引張強度, flat 65.1 MPa ISO 527
引張強度, upright 51.6 MPa ISO 527
破壊ひずみ, flat 6.5 % ISO 527
破壊ひずみ, upright 3.2 % ISO 527
曲げ弾性率, flat 2150 MPa ISO 178
曲げ弾性率, upright 2000 MPa ISO 178
曲げ強さ, flat 92.6 MPa ISO 178
曲げ強さ, upright 96.5 MPa ISO 178
シャルピー衝撃強さ, +23°C, flat 201 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, +23°C, upright 22.6 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C, flat 13.8 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, +23°C, upright 5.5 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C, flat 119 kJ/m² ISO 180/1U
アイゾット衝撃試験, +23°C, upright 14.3 kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C, flat 12 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ, +23°C, upright 5.5 kJ/m² ISO 180/1A
S: These properties are reported by the producer according standards that are different to our defaults.
特殊な特性
成形加工法.
Additive Manufacturing
納入形状.
Monofilament
な特性
Good Adhesion, Thermal Stability
耐薬品性
General Chemical Resistance
領域別の利用可能性
北アメリカ., ヨーロッパ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.