Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAKEEP® 5000 P - PEEK - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAKEEP® 5000 P:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestakeep datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Unreinforced, high-viscosity polyether ether ketone powder

VESTAKEEP® 5000 P is an unreinforced, high-viscosity polyether ether ketone powder.

The semi-crystalline polymer features superior thermal and chemical resistance. VESTAKEEP® 5000 P is of low flammability.

VESTAKEEP® 5000 P is supplied as powder in boxes with moisture-proof polyethylene liners.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

Pigmentation may affect the values.

For information about processing of VESTAKEEP® 5000 P, please follow the general recommendations in our brochure “VESTAKEEP® High Performance in Powder Form Polyether Ether Ketone Powders“.

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM OR VISIT OUR PRODUCT AT WWW.INDUSTRIAL.VESTAKEEP.COM
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 7.6 cm³/10min ISO 1133
温度 380 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 3500 MPa ISO 527
降伏応力 95 MPa ISO 527
降伏ひずみ 5 % ISO 527
破壊呼びひずみ 27 % ISO 527
ノッチ付きシャルピー衝撃強さ, +23°C 9 kJ/m² ISO 179/1eA
Type of failure C - -
熱的特性値単位テスト基準
ISO データ
溶融温度, 10°C/min 336 °C ISO 11357-1/-3
特殊な特性
成形加工法.
射出成形., コーティング., トランスファー成形.
納入形状.
パウダー.
な特性
Thermal Stability
耐薬品性
General Chemical Resistance
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.