Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® E62-S3 - TPA - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® E62-S3:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能
Any use of this information falls under the rules of our disclaimer.
商品の説明文

Heat- and light-stabilized compound based on polyamide 12 elastomer for molding of sport shoe soles

VESTAMID® E62-S3 is a PA 12 elastomer consisting of PA 12 segments and softening segments. The material is free of volatile or migrating plasticizer.

The VESTAMID® E represent thermoplastic elastomers generically characterized as polyether block copolyamides (PEBA) consisting of PA 12 and polyether segments.
 
VESTAMID® E62-S3 is especially developed for sport shoe soles. It has good impact strength at low temperatures.

VESTAMID® E62-S3 is supplied as spherical pellets in moisture-proof packaging, ready for processing.
 
The process temperatures should be within a range of 190°C – 230°C.

Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM

Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 20 / * cm³/10min ISO 1133
温度 240 / * °C -
荷重 2.16 / * kg -
成形収縮率, 平行 0.8 / * % ISO 294-4, 2577
成形収縮率, 直角 1.4 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 370 / 365 MPa ISO 527
降伏応力 23 / 24 MPa ISO 527
降伏ひずみ 30 / 26 % ISO 527
破壊呼びひずみ >50 / >50 % ISO 527
シャルピー衝撃強さ, +23°C N / N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C N / N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 120 / 112 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C 8 / 11 kJ/m² ISO 179/1eA
Type of failure C / C - -
引張衝撃強さ, +23ﾟC 230 / - kJ/m² ISO 8256/1
伸び率10%時の応力 19 / * MPa ISO 527
伸び率100%時の応力 23 / * MPa ISO 527
伸び率300%時の応力 40 / * MPa ISO 527
破壊ひずみ TPE >300 / * % ISO 527
圧縮永久ひずみ 23℃, 24h 34 / * % ISO 815
圧縮永久ひずみ 70℃, 24h 48 / * % ISO 815
圧縮永久ひずみ 100℃, 24h 85 / * % ISO 815
ショア硬さD 62 / * - ISO 7619-1
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 172 / * °C ISO 11357-1/-3
ガラス転移点, 10°C/min 10 / * °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 45 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 100 / * °C ISO 75-1/-2
ビカット軟化温度, B 110 / * °C ISO 306
線膨張係数, 平行 200 / * E-6/K ISO 11359-1/-2
線膨張係数, 直角 200 / * E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 HB / * class IEC 60695-11-10
試験片の厚さ 1.6 / * mm -
電気的特性.乾燥/調湿単位テスト基準
ISO データ
比誘電率, 100Hz 9 / - - IEC 62631-2-1
比誘電率, 1MHz 4 / - - IEC 62631-2-1
誘電正接, 100Hz 1000 / - E-4 IEC 62631-2-1
誘電正接, 1MHz 1200 / - E-4 IEC 62631-2-1
体積抵抗率 2E10 / 2.5E9 Ohm*m IEC 62631-3-1
耐電圧 39 / 35 kV/mm IEC 60243-1
その他の特性.乾燥/調湿単位テスト基準
吸水率 1.1 / * % Sim. to ISO 62
吸湿率 0.5 / * % Sim. to ISO 62
密度 1030 / - kg/m³ ISO 1183
機能
粘度せん断速度. , VESTAMID® E62-S3, TPA, Evonik
せん断応力-せん断速度. , VESTAMID® E62-S3, TPA, Evonik
応力-ひずみ. , VESTAMID® E62-S3 (乾燥), TPA, Evonik
割線弾性率−ひずみ. , VESTAMID® E62-S3 (乾燥), TPA, Evonik
応力-ひずみ. (TPE) , VESTAMID® E62-S3, TPA, Evonik
応力-ひずみ (等時的). 23°C, VESTAMID® E62-S3 (調湿), TPA, Evonik
クリープ弾性率−時間. 23°C, VESTAMID® E62-S3 (調湿), TPA, Evonik
クリープ曲線 23°C, VESTAMID® E62-S3 (調湿), TPA, Evonik
pvT , VESTAMID® E62-S3, TPA, Evonik
引張弾性率-温度. , VESTAMID® E62-S3 (乾燥), TPA, Evonik
特殊な特性
成形加工法.
射出成形., 異形押出成形., その他の押出成形.
納入形状.
ペレット.
特殊な特性.
光安定化., 紫外線安定化., 熱安定化.
アプリケーション
スポーツ用品
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
耐薬品性
酸
5wt％酢酸 (23ﾟC)
10wt％クエン酸 (23ﾟC)
塩基
35wt％水酸化ナトリウム (23ﾟC)
1wt％水酸化ナトリウム (23ﾟC)
10wt％水酸化アンモニウム (23ﾟC)
アルコール
イソプロピルアルコール23℃ (23ﾟC)
メタノール　23℃ (23ﾟC)
エタノール　23℃ (23ﾟC)
炭化水素
ヘキサン (23ﾟC)
トルエン (23ﾟC)
イソオクタン (23ﾟC)
ケトン系溶剤
アセトン (23ﾟC)
エーテル溶剤
ジエチルエーテル (23ﾟC)
食塩水
10wt％塩化ナトリウム (23ﾟC)
20wt％炭酸ナトリウム (23ﾟC)
2wt％炭酸ナトリウム (23ﾟC)
その他
エチルアセテート (23ﾟC)
過酸化水素 (23ﾟC)
水 (23ﾟC)
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.