Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTODUR® X7396 - PBT - Evonik Operations GmbH

Material Data Center offers the following functions for VESTODUR® X7396:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestodur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - 機能
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Low-shrinkage, polymer-modified polybutylene terephthalate compound

VESTODUR® X7396 is an unreinforced, heat-stabilized and polymer-modified poly­butylene terephthalate (PBT) compound with low shrinkage for extrusion.

 

The compound is especially suitable for the manufacture of stiff, small-diameter tubing, e.g. loose buffering for fiber optics. 

 

Compared with standard PBT compounds VESTODUR® X7396 has a higher hardness. This permits cable jacketing as a protective cover against rodent attacks.

 

VESTODUR® X7396 is supplied as cylindrical pellets in polyethylene packaging.

 

In the brochure "Engineering thermoplastics for high performance secondary fiber optic jacketing" instructions are given on the extrusion of loose or tight buffering for fiber optics. 

 

For information please follow the general recommendations in our flyer "VESTODUR® Polybutylene terephthalate - Compounds".

 

Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at tempIeratures not exceeding 30°C.

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTODUR.COM

Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 43 cm³/10min ISO 1133
温度 250 °C -
荷重 10 kg -
成形収縮率, 平行 1.3 % ISO 294-4, 2577
成形収縮率, 直角 1.3 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 2600 MPa ISO 527
降伏応力 65 MPa ISO 527
降伏ひずみ 4 % ISO 527
破壊呼びひずみ >50 % ISO 527
シャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C 220 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 5.5 kJ/m² ISO 179/1eA
Type of failure C - -
ノッチ付きシャルピー衝撃強さ, -30°C 4.5 kJ/m² ISO 179/1eA
Type of failure C - -
熱的特性値単位テスト基準
ISO データ
溶融温度, 10°C/min 220 °C ISO 11357-1/-3
ガラス転移点, 10°C/min 56 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 65 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 85 °C ISO 75-1/-2
ビカット軟化温度, B 115 °C ISO 306
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.6 mm -
厚さhでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 0.8 mm -
その他の特性.値単位テスト基準
吸水率 0.48 % Sim. to ISO 62
吸湿率 0.35 % Sim. to ISO 62
密度 1250 kg/m³ ISO 1183
機能
pvT , VESTODUR® X7396, PBT, Evonik
特殊な特性
成形加工法.
フィルム押出成形., Pipe/Tube Extrusion, その他の押出成形.
納入形状.
ペレット.
特殊な特性.
紫外線安定化., 熱安定化.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.