Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Visico™ FR4451/LE4439 - PE - Borealis A/S

Material Data Center offers the following functions for Visico™ FR4451/LE4439:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Visico datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 0.5 g/10min ISO 1133
温度 190 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
曲げ弾性率, 23°C 100 MPa ISO 178
ショア硬さD 40 - ISO 7619-1
Other Standards[S]
引張強度 16 MPa IEC 60811-501
破壊ひずみ 400 % IEC 60811-501
S: These properties are reported by the producer according standards that are different to our defaults.
熱的特性値単位テスト基準
ISO データ
酸素指数 32 % ISO 4589-1/-2
電気的特性.値単位テスト基準
ISO データ
耐電圧 20 kV/mm IEC 60243-1
Processing Recommendation Extrusion値単位テスト基準
Type of extrusion wire/cable - -
Pre-drying - Temperature 100 °C -
Zone 1 130 °C -
Zone 2 140 °C -
Zone 3 150 °C -
Zone 4 160 °C -
Zone 5 170 °C -
特殊な特性
成形加工法.
Wire/Cable Extrusion
納入形状.
ナチュラルカラー
特殊な特性.
難燃., Halogen-free, 紫外線安定化.
な特性
Crosslinkable, Thermal Stability
アプリケーション
電気電子
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.