Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vitane R 9930 - TPU-GF20 - geba Kunststoffcompounds GmbH

Material Data Center offers the following functions for Vitane R 9930:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vitane datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - その他の特性. - 試験片の成形条件. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
機械的特性値単位テスト基準
ISO データ
破壊ひずみ 5 % ISO 527
曲げ弾性率, 23°C 2500 MPa ISO 178
曲げ弾性率 4000 MPa ISO 178
曲げ弾性率 - 温度 -30 °C -
曲げ強さ 70 MPa ISO 178
シャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 18 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 8 kJ/m² ISO 179/1eA
耐摩耗性 102 mm³ ISO 4649
ショア硬さD 73 - ISO 7619-1
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 121 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 174 °C ISO 75-1/-2
ビカット軟化温度, B 90 °C ISO 306
線膨張係数, 平行 13.7 E-6/K ISO 11359-1/-2
線膨張係数, 直角 123 E-6/K ISO 11359-1/-2
その他の特性.値単位テスト基準
密度. 1310 kg/m³ ISO 1183
試験片の成形条件.値単位テスト基準
ISO データ
射出成形, 樹脂温度 220 °C ISO 294
射出成形, 金型温度 60 °C ISO 294
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 120 °C -
Pre-drying - Time 2 - 3 h -
Processing humidity ≤0.02 % -
樹脂温度 210 - 240 °C -
金型温度 40 - 80 °C -
Feed temperature 60 - 80 °C -
Zone 1 210 - 220 °C -
Zone 2 210 - 220 °C -
Zone 3 220 - 230 °C -
Nozzle temperature 230 - 240 °C -
特殊な特性
成形加工法.
射出成形.
な特性
Acoustical Barrier Properties, Good Adhesion, Thermal Stability
耐薬品性
Oil Resistance
アプリケーション
自動車, スポーツ用品
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.