Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® 22HSPCN BK0815 - PA66 - Ascend

Material Data Center offers the following functions for Vydyne® 22HSPCN BK0815:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Vydyne 22HSPCN BK0815 is a general-purpose, unfilled, lubricated, heat stabilized PA66 resin. Designed principally for injection-molding fabrication, this product offers a combination of engineering properties characterized by high strength; rigidity; good toughness; high melt point; good surface lubricity; abrasion resistance; and resistance to many chemicals, machine and motor oils, solvents and gasoline. This product is designed to resist thermal degradation when exposed to warm climates.
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 3100 / 1600 MPa ISO 527
降伏応力 89 / 57 MPa ISO 527
降伏ひずみ 4.8 / 20 % ISO 527
シャルピー衝撃強さ, +23°C N / N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C N / N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 4.1 / 11 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C 2.8 / 2.7 kJ/m² ISO 179/1eA
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 260 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 70 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 208 / * °C ISO 75-1/-2
試験片の厚さ 1.5 / * mm -
厚さhでの燃焼性 V-2 / * class IEC 60695-11-10
試験片の厚さ 0.7 / * mm -
酸素指数 24 / * % ISO 4589-1/-2
電気的特性.乾燥/調湿単位テスト基準
ISO データ
耐電圧 29 / - kV/mm IEC 60243-1
耐トラッキング性 500 / - - IEC 60112
その他の特性.乾燥/調湿単位テスト基準
密度 1140 / - kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット., 黒
添加剤.
滑剤.
特殊な特性.
熱安定化.
耐薬品性
General Chemical Resistance, Solvent Resistance, Oil Resistance
アプリケーション
汎用
領域別の利用可能性
アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.