Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ADVANCENE™ EM-6308-UV - (PE-HD) - Egyptian Ethylene and Derivatives Company

Material Data Center offers the following functions for ADVANCENE™ EM-6308-UV:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Advancene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
Other Standards[S]
용융 흐름성, MFI 8.3 g/10min
온도 190 °C -
하중 2.16 kg -
S: These properties are reported by the producer according standards that are different to our defaults.
기계적 특성값단위시험규격
Other Standards[S]
항복강도 31 MPa
파단시 강도 17.9 MPa
항복변형률 6 %
파단시 신율 350 %
쇼어 D 경도 61 - ´
S: These properties are reported by the producer according standards that are different to our defaults.
열적 특성값단위시험규격
Other Standards[S]
DTUL @ 66 psi 84 °C
녹는점 133 °C
비카트 연화 온도 131 °C
S: These properties are reported by the producer according standards that are different to our defaults.
기타 특성값단위시험규격
밀도 963 kg/m³ ASTM D 792
특징
생산 공정
사출 성형
특성
Low Warpage, Homopolymer
지역별 검색
짱쨌쨈, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.