Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BMC S 1800 - UP-(MD+GF)65 - Polynt S.p.A.

Material Data Center offers the following functions for BMC S 1800:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other BMC datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
성형 수축률, 평행 0.1 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
챠피 충격 강도, +23°C 60 kJ/m² ISO 179/1eU
로크웰 경도 M 80 - ISO 2039-2
Other Standards[S]
굴곡 계수, 23°C 9000 MPa ISO 14125A
굴곡 강도 120 MPa ISO 14125A
S: These properties are reported by the producer according standards that are different to our defaults.
전기적 특성값단위시험규격
ISO 데이터
부피 저항 1E12 Ohm*m IEC 62631-3-1
표면 저항 1E14 Ohm IEC 62631-3-2
CTI 600 - IEC 60112
기타 특성값단위시험규격
물에서의 흡수성 0.2 % ISO 62와 유사
밀도 1750 kg/m³ ISO 1183
특징
생산 공정
Compression Molding
인도 유형
벌크 몰딩 콤파운드
특별 특성
고충격 또는 고충격 보강
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.