Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of COPEC® CC60CN - TPE - KRAIBURG TPE GmbH & Co. KG

Material Data Center offers the following functions for COPEC® CC60CN:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Copec datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
기계적 특성값단위시험규격
ISO 데이터
인장 강도 6 MPa ISO 37
파단시 신율 1000 % ISO 37
70 C, 영구 압축줄음율, 24h 51 % ISO 815
100 C, 영구 압축줄음율, 24h 76 % ISO 815
쇼어 A 경도 60 - ISO 7619-1
열적 특성값단위시험규격
ISO 데이터
두께 H인 제품의 난연성 HB class IEC 60695-11-10
기타 특성값단위시험규격
밀도 1260 kg/m³ ISO 1183
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 - 6 h -
Processing humidity ≤0.02 % -
용융수지온도 180 - 220 °C -
성형온도 40 - 60 °C -
Zone 1 180 °C -
Zone 2 190 °C -
Zone 3 200 °C -
Injection pressure 20 - 100 MPa -
Back pressure 2 - 10 MPa -
유지압력 8 - 60 MPa -
Maximum residence time 10 min -
특징
생산 공정
사출 성형, 기타 압출
인도 유형
자연 색상
특성
Good Adhesion, Low Fogging, Low Odor, Soft Feel
내화학성에
Oil Resistance
응용
자동차의, 전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.