Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Drystar™ 0601 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Drystar™ 0601:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Drystar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 전기적 특성 - 광학 특성 - 기타 특성 - 기계적 성질 (필름) - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2100 MPa ISO 527
항복강도 50 MPa ISO 527
파단시 강도 28 MPa ISO 527
파단시 신율 100 % ISO 527
굴곡 계수, 23°C 2000 MPa ISO 178
Izod충격강도, +23°C N kJ/m² ISO 180/1U
아이조드 충격은 노치, +23°C 6.2 kJ/m² ISO 180/1A
아이조드 충격은 노치 4.2 kJ/m² ISO 180/1A
온도 -40 °C -
관통 에너지, +23°C 44 J ISO 6603-2
로크웰 경도 R 109 - ISO 2039-2
ASTM 데이터
인장탄성률 2100 MPa ASTM D 638
항복강도 50 MPa ASTM D 638
파단시 강도 28 MPa ASTM D 638
파단시 신율 130 % ASTM D 638
굴곡 계수 2100 MPa ASTM D 790
로크웰 경도 R 106 - ASTM D 785
아이조드 충격은 노치, 1/8 in 101 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 37 J/m ASTM D 256
온도 -40 °C -
Izod충격강도, 1/8 in N J/m ASTM D 256
열적 특성값단위시험규격
ASTM 데이터
열팽창 계수, 평행 51 E-6/K ASTM D 696
DTUL @ 66 psi 70 °C ASTM D 648
DTUL @ 264 psi 64 °C ASTM D 648
유리 전이 온도 80 °C ASTM E 1356
비카트 연화 온도 85 °C ASTM D 1525
열전도율, 솔리드 0.0303 W/(m K) ASTM C 177
전기적 특성값단위시험규격
ASTM 데이터
전기 압력, 단기간의 16 kV/mm ASTM D 149
소산 인자, 1 MHz 0.02 - ASTM D 150
상대 유전율, 1 MHz 2.4 - ASTM D 150
표면 저항 1E16 Ohm ASTM D 257
부피 저항 1E15 Ohm*cm ASTM D 257
아크 저항 158 s ASTM D 495
광학 특성값단위시험규격
ASTM 데이터
광택도 108 - ASTM D 2457
탁도 0.8 % ASTM D 1003
광선 투겠淅 91 % ASTM D 1003
기타 특성값단위시험규격
밀도 1270 kg/m³ ISO 1183
물에서의 흡수성, 24hr 0.13 % ASTM D 570
밀도 1270 kg/m³ ASTM D 792
기계적 성질 (필름) 값단위시험규격
ISO 데이터
트라우저 전단강도, 평행 36 N/mm ISO 6383-1
트라우저 전단강도, 수직 36 N/mm ISO 6383-1
ASTM Data
인장탄성률, 평행 1900 MPa ASTM D 882
인장탄성률, 수직 1900 MPa ASTM D 882
항복강도, 평행 52 MPa ASTM D 882
항복강도, 수직 52 MPa ASTM D 882
파단시 강도, 평행 59 MPa ASTM D 882
파단시 강도, 수직 55 MPa ASTM D 882
항복변형률, 평행 4 % ASTM D 882
항복변형률, 수직 4 % ASTM D 882
파단시 신율 , 평행 400 % ASTM D 882
파단시 신율 , 수직 400 % ASTM D 882
시편두께 0.25 mm -
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 70 °C -
Pre-drying - Time 6 h -
용융수지온도 250 - 270 °C -
성형온도 15 - 40 °C -
특징
생산 공정
사출 성형, 외형 압출, 중공 성형
특별 특성
고충격 또는 고충격 보강
특성
Copolymer
내화학성에
General Chemical Resistance
Certifications
Food contact
응용
포장
지역별 검색
쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.