Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DuraStar™ DS2010 - PCTA - Eastman Chemical Co.

Material Data Center offers the following functions for DuraStar™ DS2010:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Durastar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 광학 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서

Durastar™ DS2010 polymer contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. DS2010 has very good toughness as shown by Izod impact resistance. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but DS2010 maintains its physical properties when exposed to these oils, and its appearance is virtually unchanged. Easy to process, it flows readily and fills intricate molds. Under existing

United States Food and Drug Administration (FDA) regulations, Durastar™ DS2010 may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240. This product is certified to ANSI/NSF Standard 51.




Processing/Physical Characteristics값단위시험규격
ASTM 데이터
성형 수축률, 평행 0.004 mm/mm ASTM D 955
기계적 특성값단위시험규격
ISO 데이터
항복강도 47 MPa ISO 527
항복변형률 4 % ISO 527
파단시 강도 49 MPa ISO 527
파단시 신율 210 % ISO 527
굴곡 계수, 23°C 1750 MPa ISO 178
굴곡 강도 64 MPa ISO 178
아이조드 충격은 노치, +23°C 29.6 kJ/m² ISO 180/1A
아이조드 충격은 노치 6.3 kJ/m² ISO 180/1A
온도 -40 °C -
관통 에너지, +23°C 71 J ISO 6603-2
ASTM 데이터
항복강도 46 MPa ASTM D 638
파단시 강도 53.1 MPa ASTM D 638
항복변형률 5 % ASTM D 638
파단시 신율 310 % ASTM D 638
굴곡 계수 1900 MPa ASTM D 790
로크웰 경도 105 - ASTM D 785
아이조드 충격은 노치, 1/8 in 370 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 60 J/m ASTM D 256
온도 -40 °C -
Izod충격강도, 1/8 in N J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 66 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 73 °C ISO 75-1/-2
ASTM 데이터
UL94 난연성 V-2 - UL 94
테스트 두께 3 mm -
DTUL @ 66 psi 73 °C ASTM D 648
DTUL @ 264 psi 65 °C ASTM D 648
전기적 특성값단위시험규격
ASTM 데이터
전기 압력, 단기간의 16.6 kV/mm ASTM D 149
소산 인자, 1 MHz 0.015 - ASTM D 150
상대 유전율, 1 MHz 2.5 - ASTM D 150
표면 저항 1E17 Ohm ASTM D 257
부피 저항 1E17 Ohm*cm ASTM D 257
아크 저항 123 s ASTM D 495
광학 특성값단위시험규격
ASTM 데이터
탁도 0.3 % ASTM D 1003
광선 투겠淅 91 % ASTM D 1003
기타 특성값단위시험규격
밀도 1190 kg/m³ ISO 1183
밀도 1200 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 70 °C -
Pre-drying - Time 3 h -
용융수지온도 250 - 290 °C -
성형온도 15 - 30 °C -
특징
생산 공정
사출 성형
인도 유형
자연 색상
부가물
이형제
특별 특성
고충격 또는 고충격 보강, 투명도
내화학성에
General Chemical Resistance, Oil Resistance
Certifications
Food contact, Food approval FDA 21 CFR, Food approval NSF 51
응용
포장, 스포츠 장비
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.