Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DuraStar™ MN611 - PCTA - Eastman Chemical Co.

Material Data Center offers the following functions for DuraStar™ MN611:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Durastar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 광학 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서

Durastar™ Polymer MN611 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release to improve ejection. It has excellent appearance and is nearly water-clear. Benefits include toughness, chemical resistance, and excellent processing characteristics. MN611 has very good toughness.




Processing/Physical Characteristics값단위시험규격
ASTM 데이터
성형 수축률, 평행 0.004 mm/mm ASTM D 955
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 1800 MPa ISO 527
항복강도 47 MPa ISO 527
항복변형률 4 % ISO 527
파단시 강도 46 MPa ISO 527
파단시 신율 200 % ISO 527
굴곡 계수, 23°C 1850 MPa ISO 178
굴곡 강도 65 MPa ISO 178
아이조드 충격은 노치, +23°C 7.8 kJ/m² ISO 180/1A
아이조드 충격은 노치 4.8 kJ/m² ISO 180/1A
온도 -40 °C -
ASTM 데이터
항복강도 47 MPa ASTM D 638
파단시 강도 51 MPa ASTM D 638
항복변형률 5 % ASTM D 638
파단시 신율 300 % ASTM D 638
굴곡 계수 2000 MPa ASTM D 790
로크웰 경도 103 - ASTM D 785
아이조드 충격은 노치, 1/8 in 80.1 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 40 J/m ASTM D 256
온도 -40 °C -
Izod충격강도, 1/8 in N J/m ASTM D 256
열적 특성값단위시험규격
ASTM 데이터
DTUL @ 66 psi 74 °C ASTM D 648
DTUL @ 264 psi 65 °C ASTM D 648
광학 특성값단위시험규격
ASTM 데이터
탁도 0.3 % ASTM D 1003
광선 투겠淅 91 % ASTM D 1003
기타 특성값단위시험규격
밀도 1200 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 71 °C -
Pre-drying - Time 3 - 4 h -
용융수지온도 232 - 277 °C -
성형온도 16 - 38 °C -
특징
생산 공정
사출 성형
인도 유형
자연 색상
부가물
이형제
특별 특성
투명도, 멸균, 에틸렌 산화물 멸균(EtO), Gamma irradiation sterilization
특성
Color Stability
내화학성에
General Chemical Resistance, Solvent Resistance, Radiation Resistance
Certifications
Food contact, Food approval FDA 21 CFR, Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved
응용
의료
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.