Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Eastar™ A150 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Eastar™ A150:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Eastar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
열적 특성 - 광학 특성 - 기타 특성 - 기계적 성질 (필름)
Any use of this information falls under the rules of our disclaimer.
제품 설명서

Eastar™ A150 Copolyester is a poly(1,4-cyclohexylene-dimethylene terephthalate/isophthalate). It is produced by reacting terephthalic acid and isophthalic acid with the glycol 1,4-cyclohexanedimethanol. Eastar™ A150 is

intended primarily for extrusion into film and sheeting for packaging applications. It has excellent hydrolytic stability and good heat stability. Eastar™ A150 copolyester is lawful for use in food contact applications under food additive regulations published at 21 CFR 177.1240 by the Federal Food and Drug Administration. Therefore, it is lawful for use as a packaging material for meat or poultry foods prepared under federal inspection of the U.S. Department of Agriculture regulations at 9 CFR 318.7 and 381.147.




열적 특성값단위시험규격
ASTM 데이터
녹는점 261 °C ASTM D 3418
유리 전이 온도 91 °C ASTM E 1356
광학 특성값단위시험규격
ASTM 데이터
광택도 108 - ASTM D 2457
탁도 0.5 % ASTM D 1003
광선 투겠淅 93 % ASTM D 1003
기타 특성값단위시험규격
밀도 1200 kg/m³ ASTM D 792
Bulk Density 670 kg/m³ -
기계적 성질 (필름) 값단위시험규격
ASTM Data
인장탄성률, 평행 1600 MPa ASTM D 882
인장탄성률, 수직 1600 MPa ASTM D 882
항복강도, 평행 43 MPa ASTM D 882
항복강도, 수직 43 MPa ASTM D 882
파단시 강도, 평행 56 MPa ASTM D 882
파단시 강도, 수직 56 MPa ASTM D 882
항복변형률, 평행 5 % ASTM D 882
항복변형률, 수직 5 % ASTM D 882
파단시 신율 , 평행 250 % ASTM D 882
파단시 신율 , 수직 250 % ASTM D 882
시편두께 0.28 mm -
특징
생산 공정
필름 압출, 시트 압출
특별 특성
열안정성, 투명도
특성
Copolymer
내화학성에
Hydrolytically Stable
Certifications
Food contact, Food approval FDA 21 CFR
응용
포장
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.