Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® 1175 A W - (TPU-ARET) - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 테스트 견본 생산 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

DESCRIPTION
Elastollan 1175 AW is a polyether based TPU with plasticiser

SPECIAL PROPERTIES
excellent resistance to hydrolysis and good flexibility at low temperature,
resistance to microbiological attack, good wear performance,
high tensile strength, good damping behavior

TYPICAL APPLICATIONS
cable sheathing, plugs and terminations, hoses, damping elements

OTHER HINTS
predrying: 2-3h at 70-85°C (dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

기계적 특성	값	단위	시험규격
ISO 데이터
50%변형하에서의 강도	3	MPa	ISO 527
파단시 신율	>50	%	ISO 527
100% 변형시 강도	4	MPa	ISO 527
300% 변형시 강도	8	MPa	ISO 527
파단시 강도 TPE	40	MPa	ISO 527
파단시 신율 TPE	>300	%	ISO 527
23 C, 영구 압축줄음율, 24h	20	%	ISO 815
70 C, 영구 압축줄음율, 24h	40	%	ISO 815
전단강도	40	kN/m	ISO 34-1
내마모성	45	mm³	ISO 4649
쇼어 A 경도	75	-	ISO 7619-1

열적 특성	값	단위	시험규격
ISO 데이터
유리 전이 온도, 10 °C/min	-46	°C	ISO 11357-1/-2
1.5mm 평균두께에서의 난연성	V-2	class	IEC 60695-11-10
두께 H인 제품의 난연성	V-0	class	IEC 60695-11-10
산소지수로서의 난연성	25	%	ISO 4589-1/-2

전기적 특성	값	단위	시험규격
ISO 데이터
소산 인자, 1MHz	1100	E-4	IEC 62631-2-1
CTI	600	-	IEC 60112

기타 특성	값	단위	시험규격
밀도	1140	kg/m³	ISO 1183

테스트 견본 생산	값	단위	시험규격
ISO 데이터
사출성형: 용융수지온도	200	°C	ISO 294
사출성형: 금형온도	60	°C	ISO 294

도표

특징

생산 공정

사출 성형, 외형 압출

인도 유형

펠렛 (입자,알갱이)

부가물

가소제

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

기타 정보

사E성

Barrel temperature : 195 - 205 °C
Melt temperature : 205 °C
Mold temperature: 25 - 40 °C

프로파일 압

Barrel temperature : 160 - 175 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.