Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® 890 A FC - (TPU-ARES) - BASF Polyurethanes GmbH

Material Data Center offers the following functions for Elastollan® 890 A FC:
unit conversion, PDF datasheet print, comparison with other plastics, parameters for material models, CAE Interfaces

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 기타 특성 - 도표
Any use of this information falls under the rules of our disclaimer.
제품 설명서
DESCRIPTION
Elastollan 890 A FC is a polyester based TPU

SPECIAL PROPERTIES
good wear performance, good damping behavior and good rebound elasticity,
high tensile strength, good resistance to tear propagation

TYPICAL APPLICATIONS
transparent films

OTHER HINTS
predrying: 2-3h at 100-110°C (air circulating oven)
or 90 °C (dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance
기계적 특성값단위시험규격
ISO 데이터
챠피 노치드 충격 강도, +23°C N kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 200 kJ/m² ISO 179/1eA
100% 변형시 강도 10 MPa ISO 527
파단시 강도 TPE 50 MPa ISO 527
파단시 신율 TPE >300 % ISO 527
23 C, 영구 압축줄음율, 24h 32 % ISO 815
70 C, 영구 압축줄음율, 24h 43 % ISO 815
전단강도 120 kN/m ISO 34-1
내마모성 45 mm³ ISO 4649
쇼어 A 경도 94 - ISO 7619-1
기타 특성값단위시험규격
밀도 1220 kg/m³ ISO 1183
도표
점도-변형률 , Elastollan® 890 A FC, (TPU-ARES), BASF PU
전단-변형률 , Elastollan® 890 A FC, (TPU-ARES), BASF PU
동전단탄성율-온도 , Elastollan® 890 A FC, (TPU-ARES), BASF PU
응력-신율 (TPE) , Elastollan® 890 A FC, (TPU-ARES), BASF PU
특징
생산 공정
필름 압출, 외형 압출
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.