Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® R 3000 - (TPU-ARES)-GF - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 테스트 견본 생산 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

DESCRIPTION
Elastollan R 3000 is a glass fibre-reinforced TPU

SPECIAL PROPERTIES
very good impact strength, high stiffness combined with good
strain, low thermal expansion coefficient
equivalent to metal (Al), low mould shrinkage, ease of paintability

TYPICAL APPLICATIONS
technical parts, support of catalyst for plugs, cabinets

OTHER HINTS
predrying: 2-3h at 100-120°C
(air circulating oven or dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

기계적 특성	값	단위	시험규격
ISO 데이터
인장탄성률	2800	MPa	ISO 527
파단시 강도	80	MPa	ISO 527
파단시 신율	10	%	ISO 527
챠피 충격 강도 , +23°C	120	kJ/m²	ISO 179/1eU
챠피 충격 강도, -30°C	70	kJ/m²	ISO 179/1eU
챠피 노치드 충격 강도, +23°C	22	kJ/m²	ISO 179/1eA
챠피 노치드 충격 강도, -30°C	10	kJ/m²	ISO 179/1eA
파단시 강도 TPE	80	MPa	ISO 527
파단시 신율 TPE	10	%	ISO 527
쇼어 D 경도	73	-	ISO 7619-1

열적 특성	값	단위	시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa	132	°C	ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa	175	°C	ISO 75-1/-2
두께 H인 제품의 난연성	HB	class	IEC 60695-11-10
Yellow Card 유효한	예	-	-

전기적 특성	값	단위	시험규격
ISO 데이터
소산 인자, 100Hz	360	E-4	IEC 62631-2-1
소산 인자, 1MHz	490	E-4	IEC 62631-2-1
부피 저항	1E11	Ohm*m	IEC 62631-3-1
표면 저항	>1E15	Ohm	IEC 62631-3-2
전기 압력	36	kV/mm	IEC 60243-1
CTI	600	-	IEC 60112

기타 특성	값	단위	시험규격
물에서의 흡수성	1	%	ISO 62와 유사
밀도	1380	kg/m³	ISO 1183

테스트 견본 생산	값	단위	시험규격
ISO 데이터
사출성형: 용융수지온도	230	°C	ISO 294
사출성형: 금형온도	60	°C	ISO 294

도표

특징

생산 공정

사출 성형

인도 유형

펠렛 (입자,알갱이)

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

기타 정보

사E성

Barrel temperature : 225 - 235 °C
Melt temperature : 235 °C
Mold temperature: 25 - 70 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.