Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of EMERGE™ PC/ABS 7710 - (PC+ABS) - Trinseo

Material Data Center offers the following functions for EMERGE™ PC/ABS 7710:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Emerge datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 13 g/10min ISO 1133
온도 260 °C -
负荷 2.16 kg -
성형 수축률, 평행 0.5 % ISO 294-4, 2577
ASTM 데이터
용융 흐름성, MFI 11 g/10min ASTM D 1238
온도 230 °C -
하중 3.8 kg -
성형 수축률, 평행 0.005 mm/mm ASTM D 955
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2560 MPa ISO 527
항복강도 55 MPa ISO 527
항복변형률 3.8 % ISO 527
파단시 강도 45 MPa ISO 527
파단시 신율 43 % ISO 527
챠피 노치드 충격 강도, +23°C 40 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 15 kJ/m² ISO 179/1eA
아이조드 충격은 노치, +23°C 50 kJ/m² ISO 180/1A
아이조드 충격은 노치 14 kJ/m² ISO 180/1A
온도 -30 °C -
ASTM 데이터
인장탄성률 2620 MPa ASTM D 638
항복강도 60 MPa ASTM D 638
파단시 강도 48.3 MPa ASTM D 638
항복변형률 3.8 % ASTM D 638
파단시 신율 65 % ASTM D 638
굴곡 계수 2689 MPa ASTM D 790
굴곡 강도 96.5 MPa ASTM D 790
로크웰 경도 R 120 - ASTM D 785
아이조드 충격은 노치, 1/8 in 480 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 198 J/m ASTM D 256
온도 -17.8 °C -
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 77 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 88 °C ISO 75-1/-2
비카트 연화 온도, A 104 °C ISO 306
비카트 연화 온도, B 94 °C ISO 306
1.5mm 평균두께에서의 난연성 V-0 class IEC 60695-11-10
테스트 두께 1.5 mm -
두께가 h인 제품의 난연성 등급 5V 5VB class IEC 60695-11-20
테스트 두께 2.0 mm -
ASTM 데이터
UL94 난연성 V-0 - UL 94
테스트 두께 1.5 mm -
열팽창 계수, 평행 68.4 E-6/K ASTM D 696
열팽창 계수, 수직 68.4 E-6/K ASTM D 696
DTUL @ 66 psi 90.6 °C ASTM D 648
DTUL @ 264 psi 79.4 °C ASTM D 648
비카트 연화 온도 104 °C ASTM D 1525
전기적 특성값단위시험규격
ISO 데이터
상대 유전율, 100Hz 2.86 - IEC 62631-2-1
상대 유전뮬, 1MHz 2.8 - IEC 62631-2-1
소산 인자, 100Hz 40 E-4 IEC 62631-2-1
소산 인자, 1MHz 70 E-4 IEC 62631-2-1
부피 저항 >1E13 Ohm*m IEC 62631-3-1
표면 저항 >1E15 Ohm IEC 62631-3-2
기타 특성값단위시험규격
밀도 1180 kg/m³ ISO 1183
밀도 1170 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 80 - 90 °C -
Pre-drying - Time 3 - 4 h -
용융수지온도 230 - 270 °C -
성형온도 60 - 90 °C -
특징
생산 공정
사출 성형
특별 특성
난연성
특성
Blending Resin
응용
IT / 비즈니스 기계, 전기 및 전자 , 의료
지역별 검색
짱쨌쨈, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.