Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of EMOPLEN CP GFR 30 UV - PP-GF30 - Emas Plastik San.

Material Data Center offers the following functions for EMOPLEN CP GFR 30 UV:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Emoplen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 9 g/10min ISO 1133
성형 수축률, 평행 0.4 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 8000 MPa ISO 527
인장 강도 80 MPa ISO 527
파단시 신율 4 % ISO 527
아이조드 충격은 노치, +23°C 10 kJ/m² ISO 180/1A
쇼어 D 경도 73 - ISO 7619-1
열적 특성값단위시험규격
ISO 데이터
녹는점, 10°C/min 160 °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 120 °C ISO 75-1/-2
비카트 연화 온도, B 120 °C ISO 306
기타 특성값단위시험규격
밀도 1120 kg/m³ ISO 1183
특징
생산 공정
사출 성형, 기타 압출
특별 특성
U.V. 안정성 또는 기후 안정성
특성
Copolymer
지역별 검색
짱쨌쨈, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.