Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Fabru MABS - MABS - Fabru GmbH

Material Data Center offers the following functions for Fabru MABS:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Fabru datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
성형 수축률, 평행 0.005 mm/mm ASTM D 955
Other Standards[S]
용융 흐름성, MFI 25 g/10min
온도 220 °C -
하중 10 kg -
S: These properties are reported by the producer according standards that are different to our defaults.
기계적 특성값단위시험규격
ASTM 데이터
인장탄성률 2540 MPa ASTM D 638
항복강도 48 MPa ASTM D 638
파단시 신율 17 % ASTM D 638
열적 특성값단위시험규격
ASTM 데이터
UL94 난연성 HB - UL 94
기타 특성값단위시험규격
밀도 1090 kg/m³ ASTM D 792
특징
생산 공정
Additive Manufacturing
인도 유형
Monofilament
특별 특성
고충격 또는 고충격 보강
특성
Scratch Resistant
내화학성에
General Chemical Resistance, Environmental Stress Crack Resistance
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.