Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FLEXIRENE® MT40 A - (PE-LLD) - Versalis S.p.A

Check here, which other Flexirene datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

Linear low density polyethylene with antioxidants.Suitable for injection moulding process.
Flexirene MT 40 A is characterised by an excellent processability toghether a 
good impact resistance.

Main applications
Large sized technical parts, houseware, closures, lids, cups, carrier-bag handles.
Its high flowability makes it ideal for masterbatches preparation for LDPE and LLDPE

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR	50	cm³/10min	ISO 1133
온도	190	°C	-
하중	2.16	kg	-
용융 밀도	791	kg/m³	-
용융 열전도율	0.39	W/(m K)	-
용융 비열용량	2530	J/(kg K)	-
이형온도	86	°C	-

기계적 특성	값	단위	시험규격
ISO 데이터
인장탄성률	220	MPa	ISO 527
50%변형하에서의 강도	10	MPa	ISO 527
파단시 신율	>50	%	ISO 527
쇼어 D 경도	47	-	ISO 7619-1

열적 특성	값	단위	시험규격
ISO 데이터
녹는점, 10°C/min	116	°C	ISO 11357-1/-3
유리 전이 온도, 10 °C/min	105	°C	ISO 11357-1/-2
선형 열팽창 계수, 평행	152	E-6/K	ISO 11359-1/-2

기타 특성	값	단위	시험규격
밀도	925	kg/m³	ISO 1183

도표

특징

생산 공정

사출 성형

인도 유형

펠렛 (입자,알갱이)

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

기타 정보

사E성

#2

Typical processing temperature range:

    Melt temperature         160 - 200 °C

    Mold temperature          10-  40  °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.