Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® FX72T6 - PPS - Celanese

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

Fortron^® FX72T6 is an unreinforced, impact modified PPS with high flowability and high impact resistance suitable for injection molding.
The mechanical properties reported on this data sheet refer to a mold wall temperature of 135°C.

Flammability at thickness h (3 mm)

V-0

-

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
성형 수축률, 평행	1.3	%	ISO 294-4, 2577
성형 수축률, 수직	1.3	%	ISO 294-4, 2577

기계적 특성	값	단위	시험규격
ISO 데이터
인장탄성률	1680	MPa	ISO 527
파단시 강도	40	MPa	ISO 527
파단시 신율	20	%	ISO 527
챠피 충격 강도 , +23°C	N	kJ/m²	ISO 179/1eU
챠피 노치드 충격 강도, +23°C	10	kJ/m²	ISO 179/1eA

열적 특성	값	단위	시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa	100	°C	ISO 75-1/-2
비카트 연화 온도, B	122	°C	ISO 306
두께 H인 제품의 난연성	V-0	class	IEC 60695-11-10
테스트 두께	3.0	mm	-
산소지수로서의 난연성	48.5	%	ISO 4589-1/-2

전기적 특성	값	단위	시험규격
ISO 데이터
상대 유전뮬, 1MHz	3.1	-	IEC 62631-2-1
소산 인자, 1MHz	3	E-4	IEC 62631-2-1

기타 특성	값	단위	시험규격
밀도	1180	kg/m³	ISO 1183

도표

특징

생산 공정

사출 성형

특별 특성

고충격 또는 고충격 보강

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.