Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® ICE 504L - PPS-GF40 - Celanese

Material Data Center offers the following functions for FORTRON® ICE 504L:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
제품 설명서

FORTRON ICE 504L is a 40% glass fiber reinforced polyphenylene sulfide, that belongs to our new generation of Fortron® PPS.
This new technology allows optimization of molding conditions with faster cycle times. Due to the faster crystallization of the material at a higher temperature, the option of mold wall temperature reduction can be subject of advanced process optimization. The potential for optimization of Fortron® ICE by cycle time reduction is possible by standard cavity surface temperatures of 140°C. The potential for lowering the mold temperature must be checked individually and it depends on process and part design.
 



Flammability @1.6mm nom. thickn.V-0-
Flammability at thickness h (0.38 mm)V-0-
Processing/Physical Characteristics단위시험규격
ISO 데이터
성형 수축률, 평행 0.3 % ISO 294-4, 2577
성형 수축률, 수직 0.6 % ISO 294-4, 2577
용융 비열용량 1500 J/(kg K) -
기계적 특성단위시험규격
ISO 데이터
인장탄성률 15100 MPa ISO 527
파단시 강도 202 MPa ISO 527
파단시 신율 1.9 % ISO 527
챠피 충격 강도 , +23°C 53 kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C 53 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 10 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 10 kJ/m² ISO 179/1eA
열적 특성단위시험규격
ISO 데이터
녹는점, 10°C/min 280 °C ISO 11357-1/-3
유리 전이 온도, 10 °C/min 90 °C ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa 270 °C ISO 75-1/-2
하중하에서의 변형온도, 8.00 MPa 215 °C ISO 75-1/-2
선형 열팽창 계수, 평행 26 E-6/K ISO 11359-1/-2
선형 열팽창 계수, 수직 42 E-6/K ISO 11359-1/-2
1.5mm 평균두께에서의 난연성 V-0 class IEC 60695-11-10
테스트 두께 1.5 mm -
두께 H인 제품의 난연성 V-0 class IEC 60695-11-10
테스트 두께 0.4 mm -
산소지수로서의 난연성 47 % ISO 4589-1/-2
전기적 특성단위시험규격
ISO 데이터
상대 유전뮬, 1MHz 4.1 - IEC 62631-2-1
소산 인자, 1MHz 20 E-4 IEC 62631-2-1
부피 저항 >1E13 Ohm*m IEC 62631-3-1
표면 저항 >1E15 Ohm IEC 62631-3-2
기타 특성단위시험규격
물에서의 흡수성 0.02 % ISO 62와 유사
밀도 1650 kg/m³ ISO 1183
도표
응력-신율 , FORTRON® ICE 504L, PPS-GF40, Celanese
시컨트탄성율-신율 , FORTRON® ICE 504L, PPS-GF40, Celanese
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이)
부가물
이형제
Certifications
Drinking water contact
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.