Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Glastic® 1403 - UP-GF - LyondellBasell Industries

Material Data Center offers the following functions for Glastic® 1403:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Glastic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Electrically Insulating.
기계적 특성단위시험규격
ASTM 데이터
인장탄성률 17200 MPa ASTM D 638
항복강도 40.3 MPa ASTM D 638
압축 강도 155 MPa ASTM D 695
굴곡 계수 13100 MPa ASTM D 790
굴곡 강도 107 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 190 J/m ASTM D 256
열적 특성단위시험규격
ASTM 데이터
UL94 난연성 V-0 - UL 94
전기적 특성단위시험규격
ASTM 데이터
전기 압력, 단기간의 17 kV/mm ASTM D 149
소산 인자, 60 Hz 0.026 - ASTM D 150
소산 인자, 1 MHz 0.078 - ASTM D 150
상대 유전율, 60 Hz 5.8 - ASTM D 150
상대 유전율, 1 MHz 4.4 - ASTM D 150
표면 저항 4.8E14 Ohm ASTM D 257
아크 저항 199 s ASTM D 495
기타 특성단위시험규격
물에서의 흡수성, 24hr 0.13 % ASTM D 570
밀도 1940 kg/m³ ASTM D 792
특징
생산 공정
사출 성형, 트랜스퍼 성형, Compression Molding
인도 유형
벌크 몰딩 콤파운드, 검정, 화이트
응용
전기 및 전자 , 범용
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.