Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Inzea® F29 TR - (PLA+PSAC) - Nurel S.A.

Material Data Center offers the following functions for Inzea® F29 TR:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Inzea datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
more information can be found in the following table
Rilsamid® Chemical Resistance
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 3300 MPa ISO 527
인장 강도 60 MPa ISO 527
파단시 신율 3.5 % ISO 527
굴곡 계수, 23°C 3000 MPa ISO 178
굴곡 강도 100 MPa ISO 178
챠피 노치드 충격 강도, +23°C 3 kJ/m² ISO 179/1eA
열적 특성값단위시험규격
ISO 데이터
녹는점, 10°C/min 147 °C ISO 11357-1/-3
하중하에서의 변형온도, 0.45 MPa 60 °C ISO 75-1/-2
기타 특성값단위시험규격
Moisture Content 1 % -
특징
생산 공정
사출 성형, 중공 성형
특성
Amorphous
Certifications
Contains renewable resources, Biodegradable, Food contact, 퇴비화 가능 ISO 13432 (생산자), 퇴비화 가능 ISO 13432 (증명서)
지역별 검색
짱쨌쨈, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.