Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of K-Resin® ECO KR03 - SB - INEOS Styrolution

Material Data Center offers the following functions for K-Resin® ECO KR03:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other K-Resin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 광학 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Attributed Content of ISCC-certified Bio-Circular Sources (min.): 60 %
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 7.5 g/10min ASTM D 1238
온도 200 °C -
하중 5 kg -
기계적 특성값단위시험규격
ASTM 데이터
인장탄성률 1517 MPa ASTM D 638
항복강도 26.2 MPa ASTM D 638
파단시 신율 230 % ASTM D 638
굴곡 계수 1793 MPa ASTM D 790
굴곡 강도 37.2 MPa ASTM D 790
쇼어 D 경도 63 - ASTM D 2240
Other Standards[S]
파단시 평균신율 170 %
S: These properties are reported by the producer according standards that are different to our defaults.
열적 특성값단위시험규격
ASTM 데이터
DTUL @ 264 psi 62.2[ann.] °C ASTM D 648
비카트 연화 온도 85 °C ASTM D 1525
ann.: annealed
광학 특성값단위시험규격
ASTM 데이터
광택도 162 - ASTM D 2457
탁도 1 % ASTM D 1003
광선 투겠淅 92 % ASTM D 1003
기타 특성값단위시험규격
밀도 1010 kg/m³ ASTM D 792
특징
생산 공정
사출 성형, 시트 압출, 중공 성형, 열성형
인도 유형
펠렛 (입자,알갱이)
특별 특성
고충격 또는 고충격 보강, 투명도
특성
Blending Resin, High Gloss
Certifications
Contains renewable resources, Food contact, ISCC Plus
응용
의료, 포장, 장난감
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.