Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KEBAFORM C 131 XFA - POM - Barlog plastics GmbH

Material Data Center offers the following functions for KEBAFORM C 131 XFA:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Kebaform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 14 g/10min ISO 1133
온도 190 °C -
负荷 2.16 kg -
성형 수축률, 평행 2.0 % ISO 294-4, 2577
성형 수축률, 수직 2.0 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2900 MPa ISO 527
항복강도 65 MPa ISO 527
항복변형률 9 % ISO 527
파단시 신율 40 % ISO 527
챠피 충격 강도, +23°C 100 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 6 kJ/m² ISO 179/1eA
열적 특성값단위시험규격
ISO 데이터
녹는점, 10°C/min 167 °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 110 °C ISO 75-1/-2
선형 열팽창 계수, 평행 130 E-6/K ISO 11359-1/-2
선형 열팽창 계수, 수직 130 E-6/K ISO 11359-1/-2
두께 H인 제품의 난연성 HB class IEC 60695-11-10
테스트 두께 0.8 mm -
전기적 특성값단위시험규격
ISO 데이터
부피 저항 1E16 Ohm*m IEC 62631-3-1
표면 저항 1E16 Ohm IEC 62631-3-2
전기 압력 19 kV/mm IEC 60243-1
기타 특성값단위시험규격
물에서의 흡수성 0.22 % ISO 62와 유사
밀도 1410 kg/m³ ISO 1183
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 80 °C -
Pre-drying - Time 3 - 5 h -
Processing humidity ≤0.1 % -
성형온도 60 - 120 °C -
Feed temperature 60 - 80 °C -
Zone 1 180 - 220 °C -
Nozzle temperature 190 - 220 °C -
특징
생산 공정
사출 성형
특별 특성
U.V. 안정성 또는 기후 안정성
특성
Tribologic Grade, Copolymer
내화학성에
General Chemical Resistance
응용
자동차의, 캡슐화된
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.