Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KEBAFORM C 2527 - POM-GF25 - Barlog plastics GmbH

Material Data Center offers the following functions for KEBAFORM C 2527:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Kebaform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics단위시험규격
ISO 데이터
용융 흐름성, MFI 9 g/10min ISO 1133
온도 190 °C -
负荷 2.16 kg -
성형 수축률, 평행 0.7 % ISO 294-4, 2577
성형 수축률, 수직 1.4 % ISO 294-4, 2577
기계적 특성단위시험규격
ISO 데이터
인장탄성률 7300 MPa ISO 527
파단시 강도 120 MPa ISO 527
파단시 신율 2 % ISO 527
챠피 충격 강도, +23°C 30 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 6 kJ/m² ISO 179/1eA
열적 특성단위시험규격
ISO 데이터
녹는점, 10°C/min 166 °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 164 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 165 °C ISO 75-1/-2
기타 특성단위시험규격
조건에서의 흡습성 0.16 % ISO 62와 유사
밀도 1590 kg/m³ ISO 1183
Processing Recommendation Injection Molding단위시험규격
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 - 4 h -
Feed temperature 60 - 80 °C -
Nozzle temperature 190 - 210 °C -
Injection pressure 60 - 120 MPa -
Back pressure 5 - 20 MPa -
유지압력 60 - 120 MPa -
특징
생산 공정
사출 성형
특성
Tribologic Grade, Copolymer
내화학성에
General Chemical Resistance
응용
자동차의
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.