Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Kurarity™ LA3710 - TPE - Kuraray Co., Ltd.

Material Data Center offers the following functions for Kurarity™ LA3710:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Kurarity datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 광학 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
KURARITY is non-crystalline block copolymer and does not have melting point.
All the KURARITY grades show similar low temperature properties which result from Tg of poly (n-butyl acrylate) or poly (n-butyl acrylate/2-ethylhexyl acrylate) and heat resistance from Tg of PMMA.
LA series : n-butyl acrylate based block copolymers.
Suitable Applications: For PSA.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 11 g/10min ISO 1133
온도 190 °C -
负荷 2.16 kg -
기계적 특성값단위시험규격
ISO 데이터
챠피 노치드 충격 강도, +23°C N kJ/m² ISO 179/1eA
인장 강도 3.2 MPa ISO 37
쇼어 A 경도 9 - ISO 7619-1
쇼어 D 경도 5 - ISO 7619-1
Other Standards[S]
100% 변형시 강도 0.24 MPa ISO 37
S: These properties are reported by the producer according standards that are different to our defaults.
열적 특성값단위시험규격
Other Standards[S]
열전도율, 솔리드 0.14 W/(m K) ASTM E 1530
S: These properties are reported by the producer according standards that are different to our defaults.
전기적 특성값단위시험규격
Other Standards[S]
소산 인자, 60 Hz 0.00805 - JIS C 2138
소산 인자, 1 MHz 0.00749 - JIS C 2138
상대 유전율, 60 Hz 5.01 - JIS C 2138
상대 유전율, 1 MHz 4.93 - JIS C 2138
S: These properties are reported by the producer according standards that are different to our defaults.
광학 특성값단위시험규격
Other Standards[S]
광선 투겠淅 92 % ISO 13468-1
S: These properties are reported by the producer according standards that are different to our defaults.
기타 특성값단위시험규격
밀도 1050 kg/m³ ISO 1183
특징
인도 유형
펠렛 (입자,알갱이)
특별 특성
U.V. 안정성 또는 기후 안정성, 투명도
특성
Blending Resin, Good Adhesion, Low Odor, Copolymer
내화학성에
Acid Resistance, Alkali Resistance, Oil Resistance
응용
자동차의, 전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.