Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LIGHTER™ S98 - PET - Equipolymers Global

Material Data Center offers the following functions for LIGHTER™ S98:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lighter datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2300 MPa ISO 527
항복강도 55 MPa ISO 527
항복변형률 4 % ISO 527
파단시 강도 24 MPa ISO 527
파단시 신율 250 % ISO 527
굴곡 계수, 23°C 2100 MPa ISO 178
아이조드 충격은 노치, +23°C 4.5 kJ/m² ISO 180/1A
열적 특성값단위시험규격
ISO 데이터
녹는점, 10°C/min 247 °C ISO 11357-1/-3
유리 전이 온도, 10 °C/min 78 °C ISO 11357-1/-2
비카트 연화 온도, B 77 °C ISO 306
선형 열팽창 계수, 평행 83 E-6/K ISO 11359-1/-2
기타 특성값단위시험규격
Intrinsic Viscosity 0.84 dl/g -
아세트알데히드 1 ppm -
Color b 2 - CIE
Crystallinity 50 % -
Moisture Content 0.4 % -
Bulk density 880 kg/m³ -
Processing Recommendation Injection Molding값단위시험규격
용융수지온도 277 °C -
성형온도 20 °C -
특징
생산 공정
사출 성형, 중공 성형
특성
Copolymer
Certifications
Food contact
응용
포장
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.