Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LOXILENE PP GFCC40 UV3 08056 - PP-GF40 - Loxim Industries Limited

Material Data Center offers the following functions for LOXILENE PP GFCC40 UV3 08056:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Loxilene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
기계적 특성값단위시험규격
ISO 데이터
파단시 강도 85 MPa ISO 527
파단시 신율 6 % ISO 527
굴곡 계수, 23°C 7300 MPa ISO 178
굴곡 강도 128 MPa ISO 178
아이조드 충격은 노치, +23°C 22 kJ/m² ISO 180/1A
아이조드 충격은 노치 20 kJ/m² ISO 180/1A
온도 -30 °C -
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 145 °C ISO 75-1/-2
비카트 연화 온도, B 135 °C ISO 306
기타 특성값단위시험규격
밀도 1200 kg/m³ ISO 1183
특징
특별 특성
U.V. 안정성 또는 기후 안정성, 열안정성
특성
Chemically Coupled Reinforcement, Thermal Stability, Homopolymer
내화학성에
General Chemical Resistance
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.