Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LOXISTER PC/PBT GF15 IM1 06005 - (PC+PBT) - Loxim Industries Limited

Material Data Center offers the following functions for LOXISTER PC/PBT GF15 IM1 06005:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Loxister datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 15 g/10min ISO 1133
온도 265 °C -
负荷 5 kg -
기계적 특성값단위시험규격
ISO 데이터
파단시 강도 85 MPa ISO 527
파단시 신율 4 % ISO 527
굴곡 계수, 23°C 2500 MPa ISO 178
굴곡 강도 100 MPa ISO 178
아이조드 충격은 노치, +23°C 20 kJ/m² ISO 180/1A
기타 특성값단위시험규격
밀도 1320 kg/m³ ISO 1183
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 110 °C -
Pre-drying - Time 3 - 6 h -
Processing humidity ≤0.02 % -
성형온도 40 - 90 °C -
특징
생산 공정
사출 성형
특별 특성
고충격 또는 고충격 보강, 열안정성
내화학성에
General Chemical Resistance
응용
자동차의, 전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.