Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makroblend® M525 - (PC+PBT)-I - Covestro Deutschland AG

Material Data Center offers the following functions for Makroblend® M525:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makroblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
제품 설명서
  • (PC PBT) Blend, impact modified, easy release, injection molding grade. Makroblend M525 offers an exceptional low-temperature impact strength, good flowability and excellent chemical resistance. Manufactured according to GMP, tested only according to ISO 10993-5 and ISO 10993-10 for contact with uncompromised skin only
  • for questions regarding biocompatibility we ask for an email inquiry under plastics@covestro.com.
Processing/Physical Characteristics단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 21 cm³/10min ISO 1133
온도 260 °C -
하중 5 kg -
성형 수축률, 평행 0.8 % ISO 294-4, 2577
성형 수축률, 수직 0.8 % ISO 294-4, 2577
기계적 특성단위시험규격
ISO 데이터
인장탄성률 2000 MPa ISO 527
항복강도 55 MPa ISO 527
항복변형률 4.5 % ISO 527
파단시 평균신율 >50 % ISO 527
굴곡 계수, 23°C 2000 MPa ISO 178
아이조드 충격은 노치, +23°C 60 kJ/m² ISO 180/1A
아이조드 충격은 노치 45 kJ/m² ISO 180/1A
온도 -20 °C -
열적 특성단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 75 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 100 °C ISO 75-1/-2
비카트 연화 온도, B 122 °C ISO 306
1.5mm 평균두께에서의 난연성 HB class IEC 60695-11-10
테스트 두께 1.5 mm -
Yellow Card 유효한 - -
전기적 특성단위시험규격
ISO 데이터
부피 저항 >1E13 Ohm*m IEC 62631-3-1
표면 저항 >1E15 Ohm IEC 62631-3-2
CTI 225 - IEC 60112
기타 특성단위시험규격
밀도 1220 kg/m³ ISO 1183
Processing Recommendation Injection Molding단위시험규격
Pre-drying - Temperature 110 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.01 % -
용융수지온도 250 - 270 °C -
성형온도 60 - 100 °C -
Zone 1 245 - 255 °C -
Zone 2 250 - 260 °C -
Zone 3 255 - 265 °C -
Nozzle temperature 255 - 270 °C -
Back pressure 5 - 15 MPa -
특징
생산 공정
사출 성형
부가물
이형제
특별 특성
고충격 또는 고충격 보강
내화학성에
General Chemical Resistance
Certifications
Medical Grade, Biocompatibility ISO 10993
응용
의료
지역별 검색
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.