Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NIFORM 90 - POM - Soredi S.p.a.

Material Data Center offers the following functions for NIFORM 90:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Niform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 9 g/10min ASTM D 1238
온도 190 °C -
하중 2.16 kg -
성형 수축률, 평행 0.0265 mm/mm ASTM D 955
기계적 특성값단위시험규격
ASTM 데이터
항복강도 62 MPa ASTM D 638
굴곡 계수 2500 MPa ASTM D 790
굴곡 강도 90 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 76.9 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 57.6 J/m ASTM D 256
온도 -20 °C -
열적 특성값단위시험규격
ISO 데이터
선형 열팽창 계수, 수직 110 E-6/K ISO 11359-1/-2
ASTM 데이터
UL94 난연성 HB - UL 94
테스트 두께 1.6 mm -
DTUL @ 264 psi 115 °C ASTM D 648
비카트 연화 온도 150 °C ASTM D 1525
전기적 특성값단위시험규격
ISO 데이터
상대 유전뮬, 1MHz 3.7 - IEC 62631-2-1
소산 인자, 1MHz 200 E-4 IEC 62631-2-1
부피 저항 1E12 Ohm*m IEC 62631-3-1
표면 저항 1E15 Ohm IEC 62631-3-2
전기 압력 19 kV/mm IEC 60243-1
기타 특성값단위시험규격
조건에서의 흡습성 0.4 % ISO 62와 유사
밀도 1410 kg/m³ ASTM D 792
특징
생산 공정
사출 성형, 기타 압출
특성
Copolymer
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.