Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NIRETAN A F20 - PA66-GF30 - Soredi S.p.a.

Material Data Center offers the following functions for NIRETAN A F20:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Niretan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
성형 수축률, 평행 0.007 mm/mm ASTM D 955
기계적 특성건조/응축단위시험규격
ASTM 데이터
파단시 강도 140 / - MPa ASTM D 638
굴곡 계수 6500 / - MPa ASTM D 790
굴곡 강도 220 / - MPa ASTM D 790
로크웰 경도 R 116 / - ASTM D 785
아이조드 충격은 노치, 1/8 in 67.3 / - J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 57.6 / - J/m ASTM D 256
온도 -20 °C -
열적 특성건조/응축단위시험규격
ISO 데이터
선형 열팽창 계수, 수직 40 / * E-6/K ISO 11359-1/-2
ASTM 데이터
UL94 난연성 HB - UL 94
테스트 두께 1.6 mm -
DTUL @ 264 psi 245 °C ASTM D 648
녹는점 260 °C ASTM D 3418
전기적 특성건조/응축단위시험규격
ISO 데이터
상대 유전뮬, 1MHz 3.5 / 4 - IEC 62631-2-1
소산 인자, 1MHz 200 / 1000 E-4 IEC 62631-2-1
부피 저항 1E13 / 1E10 Ohm*m IEC 62631-3-1
표면 저항 * / 1E13 Ohm IEC 62631-3-2
전기 압력 30 / 35 kV/mm IEC 60243-1
기타 특성값단위시험규격
물에서의 흡수성, 24hr 8 % ASTM D 570
밀도 1280 kg/m³ ASTM D 792
특징
생산 공정
사출 성형
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.