Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Novodur® ECO H605 MR30 - ABS - INEOS Styrolution

Material Data Center offers the following functions for Novodur® ECO H605 MR30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Novodur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Novodur® ECO H605 MR30 is a high heat injection molding grade with enhanced flowability and low emission, i.e. suitable to produce parts which fulfill interior emission requirements of the automotive OEMs. The product contains 30% post-consumer mechanically recyled ABS and has received RecyClass certification.
Carbon Footprint Reduction vs Fossil-Based (3rd party validated): 20 % (ISO 14044)
Post-Consumer Recycled ABS Content (RecyClass-certified): 30 %
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 19 cm³/10min ISO 1133
온도 220 °C -
하중 10 kg -
성형 수축률, 평행 0.5 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2700 MPa ISO 527
항복강도 46 MPa ISO 527
항복변형률 2.4 % ISO 527
파단시 평균신율 14 % ISO 527
굴곡 계수, 23°C 2600 MPa ISO 178
굴곡 강도 75 MPa ISO 178
챠피 충격 강도 , +23°C 60 kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C 50 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 13 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 7 kJ/m² ISO 179/1eA
Ball indentation hardness 116 MPa ISO 2039-1
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 99 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 102 °C ISO 75-1/-2
비카트 연화 온도, B 102 °C ISO 306
기타 특성값단위시험규격
물에서의 흡수성 1.03 % ISO 62와 유사
밀도 1050 kg/m³ ISO 1183
Recycled resin content 30 % -
Bulk density 600 kg/m³ -
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 - 4 h -
용융수지온도 230 - 260 °C -
성형온도 60 - 80 °C -
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이)
특별 특성
열안정성
특성
High Gloss, Low Emission
Certifications
Recycled Resin Content, Post-Consumer Recyclate
응용
자동차의, 전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
기타 정보
사E성
PREPROCESSING

Pre-drying, Temperature: 80°C

Pre-drying, Time: 2 - 4h

PROCESSING

Melt temperature, range: 230 - 260°C

Mold temperature, range: 60 - 80°C

Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.