Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RamTal PM3013G4 - POM-GF20 - Polyram

Material Data Center offers the following functions for RamTal PM3013G4:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ramtal datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 5 g/10min ISO 1133
온도 190 °C -
负荷 2.16 kg -
성형 수축률, 평행 0.5 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
항복강도 90 MPa ISO 527
파단시 신율 2.5 % ISO 527
굴곡 계수, 23°C 3200 MPa ISO 178
아이조드 충격은 노치, +23°C 6.5 kJ/m² ISO 180/1A
ASTM 데이터
굴곡 강도 120 MPa ASTM D 790
열적 특성값단위시험규격
ISO 데이터
녹는점, 10°C/min 165 °C ISO 11357-1/-3
전기적 특성값단위시험규격
ISO 데이터
부피 저항 >1E13 Ohm*m IEC 62631-3-1
표면 저항 1E12 Ohm IEC 62631-3-2
전기 압력 20 kV/mm IEC 60243-1
기타 특성값단위시험규격
물에서의 흡수성 0.2 % ISO 62와 유사
밀도 1540 kg/m³ ISO 1183
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이)
특성
Low Odor
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.