Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Safron® H510-02 - PP - Safripol (Pty) Ltd

Material Data Center offers the following functions for Safron® H510-02:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Safron datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 2 g/10min ISO 1133
온도 230 °C -
负荷 2.16 kg -
기계적 특성값단위시험규격
ISO 데이터
항복강도 31 MPa ISO 527
항복변형률 8.5 % ISO 527
굴곡 계수, 23°C 1360 MPa ISO 178
챠피 노치드 충격 강도, +23°C 6.8 kJ/m² ISO 179/1eA
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 53 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 85 °C ISO 75-1/-2
비카트 연화 온도, B 90 °C ISO 306
기타 특성값단위시험규격
밀도 900 kg/m³ ISO 1183
Processing Recommendation Injection Molding값단위시험규격
Zone 1 190 °C -
Zone 2 220 - 230 °C -
Zone 3 240 - 250 °C -
Zone 4 245 °C -
Nozzle temperature 240 °C -
Processing Recommendation Extrusion값단위시험규격
Zone 1 190 °C -
Zone 2 215 °C -
Zone 3 240 °C -
Zone 4 250 °C -
Nozzle temperature 245 °C -
특징
생산 공정
사출 성형, 기타 압출, 중공 성형
인도 유형
자연 색상
특성
Homopolymer
Certifications
Food contact, Food approval 10/2011, Food approval FDA 21 CFR
응용
범용, Monofilament
지역별 검색
쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.