Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of StarFlex™ 7393-1002 - TPE - Star Thermoplastics

Material Data Center offers the following functions for StarFlex™ 7393-1002:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Starflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
기계적 특성값단위시험규격
ASTM 데이터
300% 변형시 탄성률 7.18 MPa ASTM D 412
쇼어 A 경도 94 - ASTM D 2240
전단강도 50.9 kN/m ASTM D 624
인장 강도 12.4 MPa ASTM D 412
파단시 신율 610 % ASTM D 412
기타 특성값단위시험규격
밀도 1150 kg/m³ ASTM D 792
특징
인도 유형
자연 색상
특별 특성
U.V. 안정성 또는 기후 안정성
특성
Good Adhesion
Certifications
Food contact, Food approval FDA 21 CFR
응용
자동차의, 범용, 스포츠 장비
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.