Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SUPREME SP 6713 XXXX - SMMA - Supreme Petrochem Ltd

Material Data Center offers the following functions for SUPREME SP 6713 XXXX:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Supreme datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 광학 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 5 g/10min ASTM D 1238
온도 200 °C -
하중 5 kg -
성형 수축률, 평행 0.0045 mm/mm ASTM D 955
기계적 특성값단위시험규격
ASTM 데이터
항복강도 52 MPa ASTM D 638
굴곡 계수 3000 MPa ASTM D 790
굴곡 강도 75 MPa ASTM D 790
로크웰 경도 R 70 - ASTM D 785
Izod충격강도, 1/8 in 200 J/m ASTM D 256
열적 특성값단위시험규격
ASTM 데이터
UL94 난연성 HB - UL 94
테스트 두께 1.6 mm -
DTUL @ 264 psi 85 °C ASTM D 648
비카트 연화 온도 100 °C ASTM D 1525
광학 특성값단위시험규격
ASTM 데이터
탁도 1.5 % ASTM D 1003
광선 투겠淅 90 % ASTM D 1003
기타 특성값단위시험규격
밀도 1050 kg/m³ ASTM D 792
Bulk Density 600 kg/m³ -
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 80 °C -
Pre-drying - Time 1 h -
용융수지온도 180 - 240 °C -
성형온도 40 - 60 °C -
특징
생산 공정
사출 성형, 기타 압출, 열성형
인도 유형
펠렛 (입자,알갱이)
특별 특성
투명도
특성
High Gloss, Scratch Resistant
Certifications
Food contact, Food approval FDA 21 CFR, RoHS
응용
IT / 비즈니스 기계, 포장
지역별 검색
쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.