Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tecolen® CP10 GR50 NL - PP-GF50 - Eurotec Mühendislik Plastikleri

Material Data Center offers the following functions for Tecolen® CP10 GR50 NL:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tecolen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 11000 MPa ISO 527
파단시 강도 90 MPa ISO 527
파단시 신율 3 % ISO 527
아이조드 충격은 노치, +23°C 20 kJ/m² ISO 180/1A
아이조드 충격은 노치 15 kJ/m² ISO 180/1A
온도 -30 °C -
열적 특성값단위시험규격
ISO 데이터
녹는점, 10°C/min 163 °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 145 °C ISO 75-1/-2
1.5mm 평균두께에서의 난연성 HB class IEC 60695-11-10
테스트 두께 1.6 mm -
두께 H인 제품의 난연성 HB class IEC 60695-11-10
테스트 두께 0.8 mm -
전기적 특성값단위시험규격
ISO 데이터
부피 저항 1E13 Ohm*m IEC 62631-3-1
표면 저항 1E15 Ohm IEC 62631-3-2
기타 특성값단위시험규격
밀도 1320 kg/m³ ISO 1183
Processing Recommendation Injection Molding값단위시험규격
용융수지온도 200 - 240 °C -
성형온도 20 - 50 °C -
Feed temperature ≤60 °C -
유지압력 40 - 80 MPa -
특징
생산 공정
사출 성형
인도 유형
자연 색상
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.