Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Terraprene® SI 601 60A nat - SEBS-MX... - FKuR Kunststoff GmbH

Material Data Center offers the following functions for Terraprene® SI 601 60A nat:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Terraprene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
more information can be found in the following table
Rilsamid® Chemical Resistance
기계적 특성값단위시험규격
ISO 데이터
쇼어 A 경도 60 - ISO 7619-1
Other Standards[S]
인장 강도 3.26 MPa DIN 53504
파단시 신율 381 % DIN 53504
S: These properties are reported by the producer according standards that are different to our defaults.
기타 특성값단위시험규격
밀도 960 kg/m³ ISO 1183
Biobased content 22 % -
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 60 °C -
Pre-drying - Time 2 - 4 h -
용융수지온도 180 - 190 °C -
성형온도 25 - 40 °C -
Zone 1 160 - 200 °C -
특징
생산 공정
사출 성형
인도 유형
자연 색상
특성
Copolymer
Certifications
Contains renewable resources
응용
장난감
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.