Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Topas® 9506F-500 - COC - Topas Advanced Polymers

Material Data Center offers the following functions for Topas® 9506F-500:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Topas datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 열적 특성 - 기타 특성 - 기계적 성질 (필름) - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 6 cm³/10min ISO 1133
온도 230 °C -
하중 2.16 kg -
열적 특성값단위시험규격
ISO 데이터
유리 전이 온도, 10 °C/min 65 °C ISO 11357-1/-2
기타 특성값단위시험규격
물에서의 흡수성 0.01 % ISO 62와 유사
밀도 1010 kg/m³ ISO 1183
기계적 성질 (필름) 값단위시험규격
ISO 데이터
인장탄성률, 평행 1800 MPa ISO 527-3
인장탄성률, 수직 1700 MPa ISO 527-3
파단시 강도, 평행 52 MPa ISO 527-3
파단시 강도, 수직 51 MPa ISO 527-3
최대변형율, 평행 3.1 % ISO 527-3
최대변형율, 수직 3.1 % ISO 527-3
압출 유형 cast - -
시편두께 0.1 mm -
Processing Recommendation Extrusion값단위시험규격
Type of extrusion film - -
Zone 1 200 - 210 °C -
Zone 2 200 - 210 °C -
Zone 3 200 - 210 °C -
Zone 4 200 - 210 °C -
Nozzle temperature 220 - 230 °C -
특징
생산 공정
필름 압출, 기타 압출
특성
Blending Resin
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.