Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tritan™ TX1000 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Tritan™ TX1000:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tritan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 광학 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서

Eastman Tritan TX1000 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Combined with Eastman Tritan™ copolyester’s outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan TX1000 copolyester may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan TX1000 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.




Processing/Physical Characteristics값단위시험규격
ASTM 데이터
성형 수축률, 평행 0.006 mm/mm ASTM D 955
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 1550 MPa ISO 527
항복강도 47 MPa ISO 527
항복변형률 7 % ISO 527
파단시 강도 58 MPa ISO 527
파단시 신율 185 % ISO 527
굴곡 계수, 23°C 1500 MPa ISO 178
굴곡 강도 59 MPa ISO 178
아이조드 충격은 노치, +23°C 93 kJ/m² ISO 180/1A
아이조드 충격은 노치 20 kJ/m² ISO 180/1A
온도 -40 °C -
ASTM 데이터
인장탄성률 1550 MPa ASTM D 638
항복강도 43 MPa ASTM D 638
파단시 강도 53 MPa ASTM D 638
항복변형률 6 % ASTM D 638
파단시 신율 210 % ASTM D 638
굴곡 계수 1550 MPa ASTM D 790
로크웰 경도 R 112 - ASTM D 785
아이조드 충격은 노치, 1/8 in 980 J/m ASTM D 256
Izod충격강도, 1/8 in N J/m ASTM D 256
열적 특성값단위시험규격
ASTM 데이터
DTUL @ 66 psi 99 °C ASTM D 648
DTUL @ 264 psi 85 °C ASTM D 648
광학 특성값단위시험규격
ASTM 데이터
탁도 1 % ASTM D 1003
광선 투겠淅 90 % ASTM D 1003
기타 특성값단위시험규격
밀도 1180 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 88 °C -
Pre-drying - Time 4 - 6 h -
용융수지온도 260 - 282 °C -
성형온도 38 - 66 °C -
특징
생산 공정
사출 성형, 외형 압출
특별 특성
고충격 또는 고충격 보강, 열안정성, 투명도
특성
Amorphous, Copolymer
내화학성에
General Chemical Resistance, Hydrolytically Stable
Certifications
Food contact, Food approval FDA 21 CFR, Food approval NSF 51
응용
건물 건설, 전기 및 전자 , 포장, 스포츠 장비
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.