Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultradur® B 4520 FC R01 - PBT - BASF

Check here, which other Ultradur datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - 물질의 비성질

Any use of this information falls under the rules of our disclaimer.

제품 설명서

Ultradur® B4520 FC R01 UN is suitable for plastic parts, where material approval regarding drinking water contact and direct food contact is a mandatory requirement.

The product is approved according to
· 21 CFR FDA §177.1660 "Poly(tetramethylene terephthalate)";
· European Food Contact European Food Contact Commission Regulation (EU) 10/2011;
· GMP (EC) N°2023/2006
For questions regarding the compliance with further regulations, and certificates, please contact your local BASF representative or Plastics Safety (E-Mail: plastics.safety@basf.com).

The products can also be offered as BMBcert™ and/or Ccycled™. Due to the Massbalance approach the product properties do not change.

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR	24	cm³/10min	ISO 1133
온도	250	°C	-
하중	2.16	kg	-

기계적 특성	값	단위	시험규격
ISO 데이터
인장탄성률	2500	MPa	ISO 527
항복강도	56	MPa	ISO 527
항복변형률	3.6	%	ISO 527
파단시 평균신율	>50	%	ISO 527
챠피 충격 강도 , +23°C	260	kJ/m²	ISO 179/1eU
챠피 충격 강도, -30°C	200	kJ/m²	ISO 179/1eU
Type of failure	C	-	-
챠피 노치드 충격 강도, +23°C	3.5	kJ/m²	ISO 179/1eA
Type of failure	C	-	-
챠피 노치드 충격 강도, -30°C	3	kJ/m²	ISO 179/1eA

열적 특성	값	단위	시험규격
ISO 데이터
녹는점, 10°C/min	223	°C	ISO 11357-1/-3
하중하에서의 변형온도, 0.45 MPa	130	°C	ISO 75-1/-2

기타 특성	값	단위	시험규격
밀도	1300	kg/m³	ISO 1183

물질의 비성질	값	단위	시험규격
ISO 데이터
점도수	120	cm³/g	ISO 307, 1157, 1628

특징

Certifications

Food contact, Food approval 10/2011, Food approval FDA 21 CFR

기타 정보

사E성

PREPROCESSING
Pre/Post-processing, max. allowed water content: .04 %
Pre/Post-processing, Pre-drying, Temperature: 80 - 120 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 250 - 275 °C
injection molding, Melt temperature, recommended: 260 °C
injection molding, Mold temperature, range: 40 - 70 °C
injection molding, Mold temperature, recommended: 60 °C

화학적 매체에 대한 저항력

산
	에서의 아세트산 (질량 5%) (23°C)
	23 °C에서의 시트르산 용액 (질량 10%) (23°C)
	23 °C에서의 락트산 (질량 10%) (23°C)
염기
	에서의 수산화나트륨 용액 (질량 35%) (23°C)
	에서의 수산화암모늄 용액 (질량 10%) (23°C)
알코올
	23 °C에서의 이소프로필 알코올 (23°C)
	23 °C에서의 메탄올 (23°C)
	23 °C에서의 에탄올 (23°C)
탄화수소
	에서의 n-헥산 (23°C)
	에서의 톨루엔 (23°C)
	에서의 이소옥탄 (23°C)
케톤
	에서의 아세톤 (23°C)
에테르
	에서의 디에틸 에테르 (23°C)
광유
	에서의 SAE 10W40 멀티그레이드 모터 오일 (23°C)
	에서의 SAE 10W40 멀티그레이드 모터 오일 (130°C)
표준 연료
	에서의 디젤 연료 (ISO 1817 액체 F 참조) (23°C)
염액
	에서의 탄산나트륨 용액 (질량 2%) (23°C)
기타
	에서의 초산 에틸 (23°C)
	에서의 물 (23°C)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.