Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultraform® H4320 UN Q600 - POM - BASF

Check here, which other Ultraform datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

High-molecular-weight grade for the extrusion of semifinished product; particularly thick walled product can be extruded at
high output rates; the material also features high thermal stability and low discoloration.

Abbreviated designation according to ISO 1043-1: POM
Designation according to ISO 29988-POM-K,,E-GNR,1-2

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR	2.6	cm³/10min	ISO 1133
온도	190	°C	-
하중	2.16	kg	-

기계적 특성	값	단위	시험규격
ISO 데이터
인장탄성률	2450	MPa	ISO 527
항복강도	61	MPa	ISO 527
항복변형률	11	%	ISO 527
파단시 평균신율	40	%	ISO 527
탄성변형률, 1h	2000	MPa	ISO 899-1
탄성변형률, 1000h	1300	MPa	ISO 899-1
챠피 노치드 충격 강도, +23°C	7	kJ/m²	ISO 179/1eA
챠피 노치드 충격 강도, -30°C	7	kJ/m²	ISO 179/1eA

열적 특성	값	단위	시험규격
ISO 데이터
녹는점, 10°C/min	165	°C	ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa	93	°C	ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa	154	°C	ISO 75-1/-2
선형 열팽창 계수, 평행	110	E-6/K	ISO 11359-1/-2
1.5mm 평균두께에서의 난연성	HB	class	IEC 60695-11-10
테스트 두께	1.6	mm	-
Yellow Card 유효한	예	-	-
두께 H인 제품의 난연성	HB	class	IEC 60695-11-10
Yellow Card 유효한	예	-	-

전기적 특성	값	단위	시험규격
ISO 데이터
상대 유전율, 100Hz	3.8	-	IEC 62631-2-1
상대 유전뮬, 1MHz	3.8	-	IEC 62631-2-1
소산 인자, 100Hz	10	E-4	IEC 62631-2-1
소산 인자, 1MHz	65	E-4	IEC 62631-2-1
부피 저항	1E12	Ohm*m	IEC 62631-3-1
표면 저항	1E15	Ohm	IEC 62631-3-2
전기 압력	40	kV/mm	IEC 60243-1
CTI	600	-	IEC 60112

기타 특성	값	단위	시험규격
물에서의 흡수성	0.8	%	ISO 62와 유사
조건에서의 흡습성	0.2	%	ISO 62와 유사
밀도	1400	kg/m³	ISO 1183

도표

특징

생산 공정

사출 성형, 필름 압출, 외형 압출, 시트 압출, 기타 압출

인도 유형

펠렛 (입자,알갱이)

부가물

이형제

특성

Color Stability, Thermal Stability

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬

기타 정보

사E성

PREPROCESSING
Pre/Post-processing, max. allowed water content: .2 %
Pre/Post-processing, Pre-drying, Temperature: 100 °C
Pre/Post-processing, Pre-drying, Time: 3 h

PROCESSING
injection molding, Melt temperature, range: 190 - 230 °C
injection molding, Melt temperature, recommended: 200 °C
injection molding, Mold temperature, range: 60 - 120 °C
injection molding, Mold temperature, recommended: 90 °C
injection molding, Dwell time, thermoplastics: 10 min

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.