Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrafuse PAHT CF15 - PA*-CF15 - BASF

Material Data Center offers the following functions for Ultrafuse PAHT CF15:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrafuse datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 열적 특성 - 기타 특성 - 3D Data
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 42.2 / * cm³/10min ISO 1133
온도 275 / * °C -
하중 5 / * kg -
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 234 / * °C ISO 11357-1/-3
유리 전이 온도, 10 °C/min 70 / * °C ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa 92 / * °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 145 / * °C ISO 75-1/-2
기타 특성건조/응축단위시험규격
밀도 1230 / 1230 kg/m³ ISO 1183
3D Data건조/응축단위시험규격
Other Standards[S]
인장탄성률, flat 8390 / 5050 MPa ISO 527
인장탄성률, upright 3530 / 2460 MPa ISO 527
인장 강도, flat 103 / 62.9 MPa ISO 527
인장 강도, upright 18.2 / 19.1 MPa ISO 527
파단시 신율 , flat 1.8 / 2.9 % ISO 527
파단시 신율 , upright 0.5 / 0.8 % ISO 527
굴곡 계수, flat 8260 / 6060 MPa ISO 178
굴곡 계수, on-edge 7670 / 6260 MPa ISO 178
굴곡 계수, upright 2710 / 2190 MPa ISO 178
굴곡 강도, flat 161 / 125 MPa ISO 178
굴곡 강도, on-edge 172 / 122 MPa ISO 178
굴곡 강도, upright 50.8 / 56 MPa ISO 178
챠피 충격 강도 , +23°C, flat 20.6 / 21.9 kJ/m² ISO 179/1eU
챠피 충격 강도, +23°C, on-edge 19.3 / 20.4 kJ/m² ISO 179/1eU
챠피 충격 강도, +23°C, upright 2.9 / 2.8 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C, flat 4.8 / 5.1 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, +23°C, on-edge 3.9 / 5.3 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, +23°C, upright 1.3 / 1.6 kJ/m² ISO 179/1eA
Izod충격강도, +23°C, flat 16.4 / 16.3 kJ/m² ISO 180/1U
Izod충격강도, +23°C, on-edge 18.1 / 15.1 kJ/m² ISO 180/1U
Izod충격강도, +23°C, upright 2.9 / 4.1 kJ/m² ISO 180/1U
아이조드 충격은 노치, +23°C, flat 4.9 / 6.5 kJ/m² ISO 180/1A
아이조드 충격은 노치, +23°C, on-edge 5.1 / 5.8 kJ/m² ISO 180/1A
S: These properties are reported by the producer according standards that are different to our defaults.
특징
생산 공정
Additive Manufacturing
인도 유형
Monofilament
특별 특성
열안정성
내화학성에
General Chemical Resistance
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.