Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® L-GF30 BK E70285 - PA12-GF30 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® L-GF30 BK E70285:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Glass-fiber reinforced, laser-weldable polyamide 12

VESTAMID®  L-GF30 BK E70285 is a glass fiber reinforced, heat-stabilized PA 12 compound with good IR laser transparency for injection molding. The material contains about 30% glass fibers, an ageing protective agent and processing aid for a fast and even form filling.

 

VESTAMID®  L-GF30 BK E70285 is laser-weldable by a diode-pumped or solid-state laser in the range of λ = 808–1064 nm. Using glass fiber reinforcement the strength and the heat deflection temperature are significantly increased.
 

Further advantages of VESTAMID® L-GF30 BK E70285 are the characteristic properties of polyamide 12 as low water absorption, good dimensional stability and almost the same properties at changing ambient humidity.

 

VESTAMID® L-GF30 BK E70285 is supplied as cylindrical pellets ready for processing in moisture-proof bags.

Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM

Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 11 / * cm³/10min ISO 1133
온도 250 / * °C -
하중 5 / * kg -
성형 수축률, 평행 0.3 / * % ISO 294-4, 2577
성형 수축률, 수직 0.9 / * % ISO 294-4, 2577
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 6800 / - MPa ISO 527
항복강도 122 / - MPa ISO 527
항복변형률 5 / - % ISO 527
파단시 평균신율 6 / - % ISO 527
챠피 충격 강도 , +23°C 85 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
챠피 충격 강도, -30°C 100 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
챠피 노치드 충격 강도, +23°C 23 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
챠피 노치드 충격 강도, -30°C 21 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 178 / * °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 165 / * °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 175 / * °C ISO 75-1/-2
비카트 연화 온도, B 175 / * °C ISO 306
전기적 특성건조/응축단위시험규격
ISO 데이터
상대 유전율, 100Hz 4 / - - IEC 62631-2-1
상대 유전뮬, 1MHz 3.2 / - - IEC 62631-2-1
소산 인자, 1MHz 290 / - E-4 IEC 62631-2-1
부피 저항 7.2E12 / - Ohm*m IEC 62631-3-1
전기 압력 48 / - kV/mm IEC 60243-1
기타 특성건조/응축단위시험규격
물에서의 흡수성 1.1 / * % ISO 62와 유사
조건에서의 흡습성 0.6 / * % ISO 62와 유사
밀도 1240 / - kg/m³ ISO 1183
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이), 검정
특별 특성
열안정성
특성
Laser Weldable, Weldable
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.